Menu
Your Cart

PLANET IGS-4215-8T2S Industrial L2/L4 8-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Switch

PLANET IGS-4215-8T2S Industrial L2/L4 8-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Switch
PLANET IGS-4215-8T2S Industrial L2/L4 8-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Switch
PLANET IGS-4215-8T2S Industrial L2/L4 8-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Switch
PLANET IGS-4215-8T2S Industrial L2/L4 8-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Switch
PLANET IGS-4215-8T2S Industrial L2/L4 8-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Switch
PLANET IGS-4215-8T2S Industrial L2/L4 8-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Switch
PLANET IGS-4215-8T2S Industrial L2/L4 8-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Switch
  • Stock: In Stock
  • Brand: PLANET
  • Model: IGS-4215-8T2S
  • Weight: 0.82kg
  • Dimensions: 8.78cm x 5.00cm x 13.50cm
337.22€
Ex Tax: 271.95€

Robustly Designed for Critical Business Applications

Designed to be installed in heavy industrial demanding environments, the IGS-4215-8T2S is the new member of PLANET Industrial-grade, DIN-rail type L2/L4 Managed Gigabit Switch family to improve the availability of critical business applications. It provides IPv6/IPv4 dual stack management and built-in L2/L4 Gigabit switching engine along with 8 10/100/1000BASE-T ports, and 2 extra 100/1000BASE-X SFP fiber ports for data and video uplink. The IGS-4215-8T2S is able to operate reliably, stably and quietly in any hardened environment without affecting its performance. It comes with operating temperature ranging from -40 to 75 degrees C in a rugged IP30 metal housing.

 

 

 

Environmentally Hardened Design

With the IP30 industrial case, the IGS-4215-8T2S provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb-side traffic control cabinets without air conditioner. Being able to operate under the temperature range from -40 to 75 degrees C, the IGS-4215-8T2S can be placed in almost any difficult environment.

 

Robust Protection

The IGS-4215-8T2S provides contact discharge of ±6KV DC and air discharge of ±8KV DC for Ethernet ESD protection. It also supports ±4KV surge immunity to improve product stability and protects users’ networks from devastating ESD attacks, making sure the flow of operation does not fluctuate.

 

Redundant Ring, Fast Recovery for Surveillance System

The IGS-4215-8T2S supports redundant ring technology and features strong rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP), and redundant power input system into customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments. In certain simple Ring network, the recovery time of data link can be as fast as < 450ms.

 

 

Robust Layer 2 Features

The IGS-4215-8T2S can be programmed for advanced switch management functions such as dynamic port link aggregation, 802.1Q VLAN, Q-in-Q VLAN, Multiple Spanning Tree Protocol (MSTP), loop and BPDU guard, IGMP snooping, and MLD snooping. Via the link aggregation, the IGS-4215-8T2S allows the operation of a high-speed trunk to combine with multiple ports such as an 8Gbps fat pipe, and supports fail-over as well.  Also, the Link Layer Discovery Protocol (LLDP) is the Layer 2 protocol included to help discover basic information about neighboring devices on the local broadcast domain.

 

 

IPv6/IPv4 Dual Stack Management

Supporting both IPv6 and IPv4 protocols, the IGS-4215-8T2S helps the SMBs to step in the IPv6 era with the lowest investment as its network facilities need not be replaced or overhauled if the IPv6 FTTx edge network is set up. 

 

 

Efficient Traffic Control

The IGS-4215-8T2S is loaded with robust QoS features and powerful traffic management to enhance services to business-class data, voice, and video solutions. The functionality includes broadcast/multicast/unicast storm control, per port bandwidth control, 802.1p/CoS/IP DSCP QoS priority and remarking. It guarantees the best performance in VoIP and video stream transmission, and empowers the enterprises to take full advantage of the limited network resources.

 

User-friendly and Secure Management

For efficient management, the IGS-4215-8T2S is equipped with Command line, Web and SNMP management interfaces.

  • With the built-in Web-based management interface, the IGS-4215-8T2S offers an easy-to-use, platform-independent management and configuration facility.
  • For text-based management, it can be accessed via Telnet and SSHv2 protocol.
  • For standard-based monitor and management software, it offers SNMPv3 connection which encrypts the packet content at each session for secure remote management.

 

Powerful Security from Layer 2 to Layer 4

PLANET IGS-4215-8T2S offers comprehensive IPv4/IPv6 Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1X port-based user and device authentication, which can be deployed with RADIUS to ensure the port level security and block illegal users. With the Protected Port function, communication between edge ports can be prevented to guarantee user privacy. Furthermore, Port Security function allows limiting the number of network devices on a given port. 

 

Advanced Network Security 

The IGS-4215-8T2S also provides DHCP Snooping, IP Source Guard and Dynamic ARP Inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before.

 

Flexibility and Long-distance Extension Solution

The two additional SFP slots built in the IGS-4215-8T2S support 100BASE-FX /1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceivers to uplink to backbone switch in long distance. The distance can be extended from 550 meters to 2 kilometers (multi-mode fiber) and up to 120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.

  

Intelligent SFP Diagnosis Mechanism

The IGS-4215-8T2S supports SFP-DDM (Digital Diagnostic Monitor) function that can easily monitor real-time parameters of the SFP for the network administrator, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.

 

 

Industrial-grade Switch for Building Automation and Security

Suitable for buildings where security is strictly to be enforced, the IGS-4215-8T2S, with eight high-speed Gigabit Ethernet interfaces, can easily build a power centrally controlled for an IP phone system, IP surveillance system, and wireless AP group in the harsh Industrial environment. 

 

 

Model that Withstands Harsh Operation and Extends Distance

The IGS-4215-8T2S is made to withstand any harsh operation in such environments as traffic control cabinets, factory floors, and indoor and outdoor locations where temperatures are extremely high or low. With a non-blocking design and compact size, the installation of the IGS-4215-8T2S is easy and helpful to build a Gigabit high-bandwidth switched network quickly.

 

Physical Port

  • 8-port 10/100/1000BASE-T RJ45 with auto MDI/MDI-X function 
  • 2-port 100/1000BASE-X SFP transceiver type auto detection 

 

Industrial Case and Installation

  • Dual power input, redundant power with reverse polarity protection
    • DC 9 to 48V input or AC 24V input
    • Active-active redundant power failure protection
    • Backup of catastrophic power failure on one supply
    • Fault tolerance and resilience
  • IP30 metal case
  • DIN-rail and wall-mount designs
  • Supports ESD 6KV DC Ethernet protection 
  • Supports -40 to 75 degrees C operating temperature
  • Free fall, shock-proof and vibration-proof for industries

 

Switching

  • Features Store-and-Forward mode with wire-speed filtering and forwarding rates
  • IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
  • 8K MAC address table size
  • 9K jumbo frame
  • Automatic address learning and address aging
  • Supports CSMA/CD protocol

 

Layer 2 Features

  • Supports VLAN
    • IEEE 802.1Q tagged VLAN
    • Up to 256 VLAN groups, out of 4096 VLAN IDs
    • Provider bridging (VLAN Q-in-Q, IEEE 802.1ad) support
    • Private VLAN (Protected port)
    • Protocol-based VLAN
    • MAC-based VLAN
    • Voice VLAN
    • GVRP (GARP VLAN Registration Protocol)
  • Supports Spanning Tree Protocol
    • IEEE 802.1D Spanning Tree Protocol (STP)
    • IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
    • IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN
    • BPDU Guard
  • Supports Link Aggregation
    • IEEE 802.3ad Link Aggregation Control Protocol (LACP)
    • Cisco ether-channel (static trunk)
    • Up to 5 trunk groups
    • Up to 10 ports per trunk group with 20Gbps bandwidth
  • Provides port mirror (many-to-1)
  • IPv6 MAC/VLAN/Multicast Address Table
  • Loop protection to avoid broadcast loops
  • Supports ERPS (Ethernet Ring Protection Switching)
  • Link Layer Discovery Protocol (LLDP) 

 

Quality of Service

  • Ingress/Egress Rate Limit per port bandwidth control
  • Supports 8 priority queues on all switch ports
  • Traffic classification
    • IEEE 802.1p CoS
    • IP TOS/DSCP/IP precedence of IPv4/IPv6 packets
    • IP TCP/UDP port number
    • Typical network application
  • Strict priority and Weighted Round Robin (WRR) CoS policies
  • Supports QoS and In/Out bandwidth control on each port
  • Traffic-policing on the switch port
  • DSCP remarking

 

Multicast

  • Supports IPv4 IGMP snooping v1, v2, v3
  • Supports IPv6 MLD snooping v1, v2
  • Querier mode support
  • IGMP snooping port filtering
  • MLD snooping port filtering

 

Security

  • Storm Control support
    • Broadcast/Multicast/Unicast
  • Authentication
    • IEEE 802.1X port-based network access authentication
    • Built-in RADIUS client to cooperate with the RADIUS servers
    • DHCP Relay and DHCP Option 82
    • RADIUS/TACACS+ users access authentication
  • Access Control List
    • IPv4/IPv6 IP-based ACL
    • IPv4/IPv6 IP-based ACE
    • MAC-based ACL
    • MAC-based ACE
  • MAC Security
    • Static MAC
    • MAC filtering
  • Port security for source MAC address entries filtering
  • DHCP snooping to filter distrusted DHCP messages
  • Dynamic ARP inspection discards ARP packets with invalid MAC address to IP address binding
  • IP source guard prevents IP spoofing attacks
  • IP address access management to prevent unauthorized intruder

 

Management

  • IPv4 and IPv6 dual stack management
  • Switch Management Interface
    • IPv4/IPv6 Web switch management 
    • Console and telnet Command Line Interface
    • SNMP v1, v2c, v3 
    • SSHv2, TLSv1.2 secure access
  • IPv6 IP address/NTP/DNS management
  • Built-in Trivial File Transfer Protocol (TFTP) client
  • Static and DHCP for IP address assignment
  • System Maintenance
    • Firmware upload/download via HTTP/TFTP
    • Hardware reset button for system reboot or reset to factory default 
    • Dual images
  • User Privilege levels control
  • Network Time Protocol (NTP)
  • Link Layer Discovery Protocol (LLDP) and LLDP-MED
  • Syslog remote alarm
  • SNMP Management
    • SNMP trap for interface link up and link down notification
    • Four RMON groups (history, statistics, alarms and events)
  • PLANET Smart Discovery Utility for deployment management
  • PLANET UNI-NMS (Universal Network Management) and Smart Discovery Utility for deployment management
  • Network diagnostic
    • SFP-DDM (Digital Diagnostic Monitor)
    • Cable diagnostic technology provides the mechanism to detect and report potential cabling issues
    • ICMPv6 / ICMPv4 remote pin
Hardware Specifications
Copper Ports8 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
Gigabit SFP Slots2 100/1000BASE-SX/LX/BX SFP interfaces
Reset Button< 5 sec: System reboot
> 5 sec: Factory default
ConnectorRemovable 6-pin terminal block for power input
Pin 1/2 for Power 1
Pin 3/4 for fault alarm
Pin 5/6 for Power 2
AlarmOne relay output for power failure.
Alarm relay current carry ability: 1A @ 24V DC
Power RequirementsDual 9~48V DC
24V AC
Power ConsumptionDC input:
Max. 1.98 watts/6.7BTU (System on)
Max. 6.93 watts/23.6BTU (Full loading)
AC input:
Max. 1.4 watts/4.7BTU (System on)
Max. 5.7 watts/19.4BTU (Full loading)
EnclosureIP30 metal case
Dimensions (W x D x H)50 x 87.8 x 135 mm
Weight510g
InstallationDIN-rail kit and wall-mount ear
ESD Protection6KV DC
LEDSystem:
Green: Power 1
Green: Power 2
Red: Alarm
Green: Ring
Green: R.O.
Per 10/100/1000T RJ45 Ports:
Green: 1000 LNK/ACT
Amber: 10/100 LNK/ACT
Per 100/1000X SFP Ports:
Green: 1000 LNK/ACT
Amber: 100 LNK/ACT
Switching Specifications
Switch ArchitectureStore-and-Forward
Switch Fabric20G/bps (non-blocking)
Switch Throughput@64 bytes14.8@ 64 bytes
MAC Address Table8K entries
Shared Data Buffer4.1Mbits
Flow ControlIEEE 802.3x pause frame for full duplex
Back pressure for half duplex
Jumbo Frame9K
Layer 2 Functions
Port MirroringTX/RX/Both
Many-to-1 monitor
Up to 4 sessions
VLAN802.1Q tag-based VLAN
802.1ad Q-in-Q tunneling (VLAN stacking)
Voice VLAN
Protocol VLAN
Private VLAN (Protected port)
GVRP
Up to 256 VLAN groups, out of 4094 VLAN IDs
Link AggregationIEEE 802.3ad LACP and static trunk
Cisco ether-channel (Static Trunk)
Up to 5 trunk groups
Up to 10 ports per trunk group with 20Gbps bandwidth
Spanning Tree ProtocolIEEE 802.1D Spanning Tree Protocol (STP)
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
STP BPDU Guard, BPDU Filtering and BPDU Forwarding
IGMP SnoopingIPv4 IGMP snooping v1, v2, v3
IGMP querier
IGMP Snooping port filtering
Up to 256 multicast groups
MLD SnoopingIPv6 MLD snooping v1, v2
Up to 256 multicast groups
QoSIngress/Egress Rate Limit per port bandwidth control
8-level priority for switching
Port number
802.1p priority
DSCP/IP precedence of IPv4/IPv6 packets
Typical network application
DSCP remarking
Security Functions
Access Control ListIPv4/IPv6 IP-based ACL/MAC-based ACL
IPv4/IPv6 IP-based ACE/MAC-based ACE
SecurityIP-MAC port binding
MAC filtering
Static MAC address
DHCP Relay and DHCP Option 82
STP BPDU guard, BPDU filtering and BPDU forwarding
DoS attack prevention
ARP inspection
IP source guard
Storm control support
Broadcast / Multicast / Unicast
AAABuilt-in RADIUS client to cooperate with RADIUS server
Network Access ControlIEEE 802.1X port-based authentication
RADIUS/TACACS+ user access authentication
Management Functions
Basic Management InterfacesTelnet
Web browser
SNMP v1, v2c
Secure Management InterfacesSSHv2, TLS v1.1/v1.2, SNMPv3
System ManagementFirmware upgrade by HTTP protocol through Ethernet network
Configuration upload/download through HTTP
LLDP protocol
SNTP
PLANET Smart Discovery Utility
PLANET UNI-NMS (Universal Network Management)
PLANET CloudViewer app
Event ManagementRemote Syslog
System log
SNMP MIBsRFC 1213 MIB-II
RFC 1493 Bridge MIB
RFC 1643 Ethernet MIB
RFC 2863 Interface MIB
RFC 2665 Ether-Like MIB
RFC 2819 RMON MIB (Groups 1, 2, 3 and 9)
RFC 2737 Entity MIB
RFC 2618 RADIUS Client MIB
RFC 2863 IF-MIB
RFC 2933 IGMP-STD-MIB
RFC 3411 SNMP-Frameworks-MIB
RFC 4292 IP Forward MIB
RFC 4293 IP MIB
RFC 4836 MAU-MIB
IEEE 802.1X PAE
LLDP
MAU-MIB
Standards Conformance
Regulatory ComplianceFCC Part 15 Class A, CE
Stability TestingIEC 60068-2-32 (free fall)
IEC 60068-2-27 (shock)
IEC 60068-2-6 (vibration)
Standards ComplianceIEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX/100BASE-FX
IEEE 802.3z Gigabit SX/LX
IEEE 802.3ab Gigabit 1000T
IEEE 802.3x flow control and back pressure
IEEE 802.3ad port trunk with LACP
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN tagging
IEEE 802.1ad Q-in-Q VLAN stacking
IEEE 802.1x Port Authentication Network Control IEEE 802.1ab LLDP
IEEE 802.3az for Energy-Efficient Ethernet
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
RFC 1112 IGMP v1
RFC 2236 IGMP v2
RFC 3376 IGMP v3
RFC 2710 MLD v1
RFC 3810 MLD v2
ITU-T G.8032 ERPS Ring
Environment
Operating Temperature-40 ~ 75 degrees C
Storage Temperature-40 ~ 85 degrees C
Humidity5 ~ 95% (non-condensing)

 

Datasheet

DateVersionDescriptionDownload
2021-10-081.0IGS-4215-8T2S

 

Firmware

DateVersionDescriptionDownload
2023-09-011.305b230801Fixed ERPS ping timeout issue.
2023-05-261.305b230428Fixed ERPS Loop issue.

 

Quick Guide

DateVersionDescriptionDownload
2024-04-121.3Release for PSTI version.
2023-03-311.2Modify contents of Quick Guide.
2021-08-201.1Initial release.

 

User's Manual

DateVersionDescriptionDownload
2023-06-091.2Add IGS-4215-16T2S-U.
2021-11-171.0Initial release.

 

EC Declaration

DateVersionDescriptionDownload
2022-05-161.0EC Declaration.